Service Telephone£º021-64820099 24-Hour Service Hotline£º15900706965 Mail:info@jichuan.sh.cn
 Liqui moly
   
 
Liqui Moly
 
 
 
 

 

 

 

 

Your present location:HomePage-Products Centre-Liqui moly
 
 

Systempflege Diesel
(Diesel System Treatment)

DESCRIPTION Diesel System Treatment is a combination of agents with a high proportion of lubrication improvers and cleaners. This product is therefore specially formulated to meet the demands of diesel engines with Common Rail high pressure injection using low sulphur diesel fuels and to give protection against wear. Other agents which have cleaning, dispersion and material protection properties maintain the operation of high-precision injectors. Due to the increased ignition performance, the fuel shows better combustion behaviour when the engine is cold and the pollution from odours in the exhaust is reduced.-

PROPERTIES

- keeps fuel system and combustion chambers clean and prevents deposits from forming
- keeps the injectors clean and guarantees improved engine combustion leading to a lower specific fuel consumption and the maximum engine performance.
- prevents seizing and resinifying of the injector needles.
- increases the lubrication action of diesel fuels low in sulphur (low sulphur diesel according to DIN EN 590) and protects high-pressure pumps from wear
- increases the cetan number of diesel fuel leading to a smooth and gentle combustion process
- contains antioxidant and prevents corrosion
- compatible with all modern diesel oxidation catalytic converter

TECHNICAL DATA

Basis: additive mixture in carrier fluid
Density at 15 ¡ãC: 0.846 g/cm3
Colour: brown
Regulation on flammable
liquids (Germany): A III
Flash point: 62 ¡ãC
Pour point: -36 ¡ãC

APPLICATION

Added to diesel fuel for all diesel engines with Common Rail injection. Ideally suitable for preserving engines when decommissioned for long periods under extreme conditions.

INSTRUCTIONS - The ignition performance is increased and the lubrication action and lubricity performance are improved only by adding the product to low-sulphur diesel fuels on a continual basis. One 250 ml can of the product is sufficient for 75 litres of fuel. Dosage 1:300

- To keep the injectors clean and for corrosion protection, add Diesel System Treatment to the passenger vehicle diesel fuel tank every 2,000 km.

- When decommissioning and preserving engines, add Diesel System Treatment to diesel fuel at the rate of 1 %. Follow the instructions on preservation.

- Diesel System Treatment can be mixed with the fuel at any time since mixing takes place automatically.

AVAILABLE
PACK SIZE Diesel System Treatment 250 ml Part no. 5139

 
 
   
Copyright © 2001-2010 All Rights Reserved ShangHai PingYiao Trading Co.,Ltd
TEL:(86)21 6482 0099¡¡FAX:(86)21 6451 3829 Service Hotline£º15900706965£¨24-hour£©Mail:info@jichuan.sh.cn